Toilet Repair, Tap & Sink Repairs in London
Tap Repair, Toilet and Sink Faults We Fix Every Week
Dripping and Stiff Taps
A spout that drips, water round the handle, or a tap that is hard to turn. Usually a worn washer, cartridge or valve seat, and usually repairable.
Washers & CartridgesNew Mixer Taps
A kitchen or basin mixer that is loose, corroded or leaking from the base. We fit the new tap with fresh flexible hoses and isolation valves, then check for leaks.
Supply & FitToilets That Keep Running
A cistern that keeps refilling, a flush that barely works or one that will not fill at all. Normally a worn flush valve, fill valve or seal inside the cistern.
Flush & Fill ValvesLeaking or Wobbly Toilets
Water round the base, a pan that rocks or a leaking pan connector. We reseal or refit it and check the soil pipe joint before we leave.
Pan & Seal RepairSlow or Blocked Sinks
A kitchen sink or basin that drains slowly or backs up. We clear the trap and waste pipe and tell you if the blockage is further along.
Trap & Waste ClearedLeaking Traps and Basins
A wet cupboard under the sink or a basin coming away from the wall. We replace the failed trap, seal or joint and fix the basin securely.
Waste & Seal RepairToilet Repair in London: Fix the Worn Part, Not the Whole Toilet
When a New Tap, Toilet or Sink Makes More Sense
New Taps and Mixers
We fit your chosen tap or supply a good one, replace old hoses and add isolation valves, so the next repair is quicker and cheaper.
New Cisterns and Toilets
Worn cisterns, dual-flush parts and close-coupled toilets replaced with the right connectors and fixings, firm and leak-free.
Sinks and Basins Fitted Properly
Level, secure and sealed, with new traps and wastes, and both hot and cold supplies checked before we finish.
From Dripping Tap to Tested Repair
Tell Us What It Is Doing
Describe the fault, the make of tap or toilet if you know it, and send a photo. Turn off the isolation valve if water is escaping.
Photos help us bring the right partWe Diagnose and Quote
We find the failed part and give you a written price for repair or replacement. Nothing starts until you agree.
Options explained clearlyWe Fix and Test It
The repair is done, tested for leaks and correct operation, and the area left clean. Covered for 12 months.
12-month guaranteeHow Much Does a Dripping Tap Repair Cost?
For one simple fault, such as a washer, cartridge or seal.
- Tap washer or cartridge replaced
- Cistern seal or valve repaired
- Trap or waste resealed
- Leak test after the repair
Supply and fit, or fit only, for taps, toilets, sinks and basins.
- Old fitting removed and taken away
- New fitting connected properly
- Isolation valves added where practical
- 12-month workmanship guarantee
For several jobs, landlord visits or a full bathroom check.
- Every fitting checked
- Tenant access arranged with you
- Itemised written price
- Written record for your files
Written Price Before Work
The price covers the job we describe. No congestion, parking or travel extras appear later.
Tap, Toilet & Sink Repairs FAQs
Why does my toilet keep running?
A running toilet usually means the flush valve seal is letting water slip into the pan, or the fill valve is not shutting off when the cistern is full. Both are small parts that we replace inside the cistern, normally in one visit, then test so the fault does not come back.
My toilet won’t flush properly. What is wrong?
A weak or failed flush is often a broken flush button or lever, a worn flush valve, or a cistern that is not filling high enough. Sometimes it is a partial blockage. We check each in turn, fix the actual cause and test the flush several times before we leave.
How much does a dripping tap repair cost?
A 2026 London price guide puts a new washer or O-ring at £60 to £95, a mixer tap cartridge at £80 to £130, and a full tap replacement at £80 to £250 plus the tap (Fantastic Services). We check the tap first and give you a written price before any work starts.
Why is my tap still dripping after I tightened it?
Over-tightening rarely cures a drip and can damage the valve seat. A drip normally means a worn washer, ceramic cartridge or scored seat inside the tap. Turn off the isolation valve if you can, and we will replace the failed part or tell you if a new tap is better value.
My toilet is leaking at the base. What causes that?
Usually a failed pan connector or seal, a loose fixing, or water from the cistern running down the pan. We find which it is before repairing, because the wrong fix means the leak comes back. If water is spreading, close the isolation valve or stopcock until we arrive.
Can you fit a tap or toilet that I have bought myself?
Yes. We check the item before fitting, as missing connectors or fixings can delay the job. We cannot guarantee the product itself, but our fitting carries a 12-month workmanship guarantee. If you prefer, we can supply a suitable replacement for you instead.
How long does a typical repair take?
Most tap, cistern and sink repairs are done in one visit, often within an hour or two, as long as the right part is available. If something has to be ordered, we agree a return time with you. Concealed pipework can take longer, and we say so in the quote.
Not Sure Whether to Repair or Replace?
Send a photo or describe the fault. We will tell you the likely cause and whether a repair or a new fitting is the more sensible spend.
020 3831 5477Direct Line
Speak to a Plumber
Book a Tap, Toilet or Sink Repair in London
✓ CHAS · SafeContractor · Constructionline Gold